Homebrew-to-Homebrew Contact on 17 meters with DL2RMM (Video)

 Here is short clip of a very cool HB2HB contact on 17 meters.  Thanks Jens! 

Check out his QRZ page here: https://www.qrz.com/db/DL2RMM

Woebot -- An AI-Based Therapy Bot for Us?

 

This was on 60 Minutes last night.  Of course it made me think of our many "Tales of Woe."  Perhaps this could be of use to us.   But I wonder how the bot would react to our typical problems: 

"I am feeling bad about myself becasue my RF amplifier keeps going into oscillation.  What should I do?"

"My opposite sideband suppression is inadequate because my filter skirts are too wide. What is your advice?" 

"My LC VFO drifts slightly and my SDR-using friends taunt me about this.  I feel dejected.  What should I do?"  

"The Raspberry Pi in my SDR rig is hallucinating and I can't find the needed wisdom files. Is there a support group for this?" 

"I have discovered spurs in the output of my transmitter.  They are 60 db down, but I still can't stop thinking about them.  What should I do?"

I can't help thinking that if Jean Shepherd had access to something like this, his Heising modulator trouble might not have spoiled his date with the girl from his school.  

What do you guys think about the Woebot?  

SolderSmoke Podcast #251 Aurora! CBLA, Winterfest, Legal Action Against SolderSmoke, HB sBITX, SDR, Raspberry Pi, Rounded Passbands, MAILBAG

Aurora Picture by Dean KK4DAS

SolderSmoke Podcast #251  4-1-2024

Audio: http://soldersmoke.com/soldersmoke251.mp3

Videos: Podcast 251 Aurora! CBLA, Winterfest, Legal Threat, sBITX, SDR, RaspPi, Rounded Passbands, MAILBAG (youtube.com)

Travelouge:  Dean goes to the North Pole to see Aurora. 

A CBLA Call to Arms! 

Winterfest.  Lots of goodies.  MXM Industries 40 meter transceiver. 1 dollar. 

Jean Shepherd. Recording of Bill talking to Shep in 1976.

Legal Trouble: Could put us out of operation for a while.  We need listener input. 

November 2023

December 2023

----------------------

Pete's Bench

Homebrew SDR (based on Zl2CTM’s original design) and how good it sounds.

Raspberry Pi Zero W is now working on FT-8 with digital adapter.

Ferrite Cores at Digi-Key (a replacement for the FT-37-43 where  you buy 100 and the price is 21 cents/each)

ADE-6 –great specs in HF but more expensive than the ADE-1

For Pete's recent blog posts, go to this site and click on "Archive" in the right column: 

https://n6qw.blogspot.com/2024/03/march-31-2924-happy-easter-to-those-who.html

----------------

Dean's Bench 

sBITX progress, McGyver-ing a lifted pad, replacing crystal on the CODEC board, sBITX success! See: 

https://kk4das.blogspot.com/2024/03/homebrew-sbitx-tx-modules-pa-lpf-and-mic.html

--------------------

Shameless Commerce Division:  Please use the Amazon link on the blog to start your Amazon purchases. And please consider using Patreon to support the podcast and blog.  We try to send extra content to our Patreon supporters. Mostly DIY RF --  Boards, Kits and Pete's PSSST

---------------------

Bill's Bench

More trouble with the 15-10 rig.  Rounded passbands in 25 MHz filter. See figure 4 in both links: 

https://www.arrl.org/files/file/QEX_Next_Issue/Nov-Dec_2009/QEX_Nov-Dec_09_Feature.pdf

https://www.networksciences.com/pdfs/tutorial.pdf

Experimenting with Balanced Mixers and Product Detectors. Paul VK3HN  Suggests the MC1496 chip; Walter KA4KXX points to SSDRA circuits

But it is on the air!  Using the PA from a BITX40 module and an RD06.  

Put an OLD dial from Pericles HI8P on 15-10 version 1.  Soul in the new machine.

Pericles' Dial on the 15-10 Rig 

Mailbag: 

Grayson KJ7UM's Hollowstate video. 

Mike WU2D's amazing 10 meter DSB transceiver. 

Jack AI4SV (Dhaka Jack) liked video of recent QSO with AzoresDSB rig

Mike AA1TJ and Dave AA7EE on backwaves and 100 uW QRPpppp

Dave G3UUR  on my curved passband problem

Alan W2AEW heard my only QSO with the MXM indsutries SupeRX/TX40

Wes W7ZOI, Mike WN2A, Walter KA4KXX. Farhan VU2ESE on passband, 

Ramakrishnan sent article about Charles Proteus Steinmetz.  Beautiful. 

Justin AC8LV built a receiver!  FB. 

San Francisco QRP:   KDOFNR TouCans Rig, and N6ASD Zinc-Oxide TX

Frank KC8JJL -- Another guy who heard first ham sigs from a homebrew rig. 

Nate KA1MUQ's homebrew thermatron superhet

Dino KL0S sent info on the PAL CB VFO I picked up at Winterfest. Airborne! 

Bob W8SX will be once again doing SolderSmoke interviews at Dayton.  Thanks Bob

Peter VK2EMU  Always good to hear from him.

Tobias Feltus -- Wisdom teeth removed, wondering if he will get sBITX hallucinations...

Rick WD5L continues to work on his Herring Aid 5

Ciprian YO6DXE wants to learn CW. No alerts from his FB Blog!

Todd K7TFC -- Likes CW, says it eliminates the Blah-Blah-Blah 

F1BFU's Amazing PSSST VFO

KD0FNR's Amazing San Francisco TouCans Rig -- A Rockmite and a Tuna Topper in a Pineapple Can Mounted on the Dipole in a Shopping Bag

Click on the image for a better look

This post has a definite San Francisco vibe. 

Hamilton KD0FNR appeared on the SolderSmoke blog way back in 2011.  Perhaps he should join forces with N6ASD who lives quite close to him in SF, and seems to share radio interests.  Also in their area is the esteemed Bay Areas blogger and homebrewer Dave AA7EE ; Dave recently sounded the CBLA alarm, alerting us to the presence of an intruder on 3579 kHz.  In the process, Dave mentioned the Pt. Reyes Web SDR, the presence of which came as welcome news to Hamilton. Finally, Dave and Hamilton mention the KPH Web SDR, which brings to mind Dick Dillman W6AWO who has been on the SolderSmoke blog several times.  

Hamilton and his kids have their rig (a Rockmite and a Tuna Topper in a Dole Pineapple can) mounted at the feedpoint of their dipole (in the red shopping bag above).   They link to it via WiFi and Bluetooth. FB.  Thomas Witherspoon has a nice presentation (by KD0FNR) of the TouCans project on his blog: https://qrper.com/2023/12/field-radio-kit-gallery-kd0fnrs-rockmite-20-and-tuna-topper/ 

Hamilton KD0FNR writes: 

At the moment, the kids whose dad I am, better known as the gang—12, 10, and 8 year-old Diaze, Mota, and Tawnse.. all internet aliases—are big into 20 meters QRP CW with Project TouCans, a Rockmite coupled to a Tuna Topper. The radio and the amp that popped us out of QRPp to plain-old QRP are both housed in a Dole Pineapple can with a tuna can as a cover and antenna mount. The whole rig is still very much mounted in our half-wave dipole! 

Project TouCans consists of a Rockmite feeding a 5 Watt Tuna Topper, all of which is housed in our dipole antenna. The Rockmite has a single crystal bandpass filter on it's rx input. That makes it a pretty wide reciever which is fine, but it's particularly sensitive to its tx frequencies, 14075.5 and 14058 kHz AND—for some reason I have yet to understand—10459 kHz. By watching the SDRs that now—thanks Dave—envelope us here at our home QTH in San Francisco, we can see the frequencies of incoming signals. That information keeps me from responding to 14059 kHz signals in vain.

And now, the headphone repeater: TouCans is completely wireless with respect to the ground. That means there's no power line, no feedline, no keyer lines and no headphone line. Keyer controls are handled via wifi to a Raspberry Pi Pico-W on the rig while audio is brought back to my headphones via Bluetooth. Power is provided by a USB-C battery pack that lives in the rig which is mounted above us in the antenna. (Yes, all of this is becuase I thought feedlines matches and baluns were too mystical and hard to understand years ago. Yes, this has probably all been more work than a balun. Yes, I am still totally enamored of my original design decision. :) ) Anyway, the bluetooth range is about 50 feet and the wifi range is shorter than that. The short of it is—pun not intended—that I can't quite use the rig while I'm in my office. But, I can send CQ to the rig every half minute or so via a memory keyer, then turn on the SDR in my office, and then sprint a bit closer to the rig when someone calls back. (It helps that houses in SF are a bit tiny.) So, SDRs are kinda an integral part of our QTH setup and it's awesome to learn about a new—to us—one! Thanks again!

W1QG's Cave Dust Twins (and other Homebrew Rigs -- SDR and HDR)

I kind of arrived at Dick Benson's QRZ.com page by accident, but what a happy accident it was.  There is a lot of homebrew goodness on Dicks page, both SDR and HDR.  

Check it out:  https://www.qrz.com/db/W1QG/

Dean's Amazing Homebrew sBITX

 

I was kind of making fun of  it during SolderSmoke podcast #250, but later that same morning I had a chance to watch the KK4DAS homebrew sBITX in action, in person, and I must say, it was very impressive.  This may be the only homebrew sBITX in the world (please correct me if I'm wrong).  

In the picture above you can see the amalgamation of traditional superhet with modern DSP.  Even for an HDR guy like me, the result is really cool.  Once again, I experienced waterfall envy.  And the sBITX receiver sounds great. 

Dean has written up his experiences with this rig in a blog post.  Check it out for more info: 

https://kk4das.blogspot.com/2024/02/homebrew-sbitx-receiver-gound-bounce.html

Thanks Dean! 

Make Your Own SDR Software! And, "Analog Man" by Joe Walsh of the Eagles (WB6ACU)

The above video appeared on Hack-A-Day this morning.  ON THE SAME MORNING, Bruce KK0S happened to send me this version of Joe Walsh WB6ACU's song "Analog Man." This version has the lyrics.  Thanks Bruce. 

I am currently struggling with some DNS server problems.  Dean KK4DAS is helping me.  In spite of many years on the internet, this DNS problem has reminded me that, like Joe Walsh, I am an analog man.  I mean, just take a look at my Mythbuster rig: (1382) Mythbuster for Lamakaan ARC - YouTube

But there are limits to my analog fanaticism.  First, while Joe proclaims that he is looking for an analog girl, I very luckily found a digital girl.  Elisa is quite digital.  Second, even though digital tech is not my thing, I am willing to accept its usefulness.  I mean, there is so much we wouldn't be doing if we were all "analog men." Like going to the moon. 

This is a hobby -- it is all for fun.  Whatever floats your boat, right?  Still, Joe's song reminds me a bit of the old "SPARK FOREVER!" that you can still see on old QSL cards. That's kind of sad.  I just recognize that my comfort zone is more analog than digital.  

HB2HB -- A Contact with Denny VU2DGR (video)

At first I didn't realize it was Denny.  On September 11, 2023 at about 2330Z I had walked back into the shack after dinner.  I think DX spots showed an Indian station on 20 meter SSB.  Without realizing who it was, I tuned him in on my Mythbuster rig, heard the other station sign off, and quickly threw in my call.  Denny came back to me right away, and I think both of us then realized that we recognized the call of the other station. Wow, it was Denny, VU2DGR, the Wizard of Kerala!   At the time of the QSO, I didn't have my phone with me; after we spoke, I went to get it,  so the video above captures part of Denny's subsequent contact. (You can also at one point hear Guapo barking.) 

Denny has been running a wonderful station that combines SDR gear with and HDR tube type amplifier and a homebrew Moxon.  

Here is Denny's station. The transceiver is a RadioBerry.  the amplifier and power supply are on the other table.  

Here is the homebrew tube-type amplifier.  This is the part of the station that really puts the HB in HB2HB! That's the power supply on the left and the amplifier itself on the right: 

That amplifier has three 807s in it, with a 6L6GC: 

Here's a video on the RadioBerry transceiver. 

Finally, here is Denny's magnificent homebrew 20 meter Moxon: 

Thanks Denny! 

The Wizard of Kerala (India) -- Denny VU2DGR -- SDR and HDR

 

His signal was just booming in on 20 meter SSB yesterday evening.  It was one of the strongest signals I've heard from India.  I wasn't able to get through the pileup, but I heard mention of a homebrew station at his end...  Sure enough a look at his QRZ.com site shows that a LOT of solder has been melted in his shack.  Both SDR and HDR stuff.  Tube projects including an 807 amplifier made from "components collected from the scrapyard." And a homebrew 20 meter Moxon.  Check it out: 

https://www.qrz.com/db/VU2DGR 

FB Denny!

Kerala is on the southwest tip of India.  It is something of a hotbed of technological innovation.  My only Indian contact using my current series of homebrew dual-banders was with VU3TPW -- Renju is also in Kerala. 

Hans Summers G0UPL and his new QMX: The Bob Crane W8SX FDIM Interviews Part 1 (audio)

http://qrp-labs.com/qmx.html

We are very pleased and grateful to present this year's series of Four Days in May interviews by our FDIM correspondent Bob Crane W8SX.   Once again Bob did an outstanding job interviewing the FDIM participants. 

In this interview, the amazing Hans Summers talks about his latest QRP Labs kit, the QMX.  It is a combination of the QCX Mini and the QDX.  

Hans explains the M:  QMX. The M is for Marriage. Magnificent. Merger. Marvelous, many things like that. It’s what you get when you marry the mechanical and conceptual design of QCX-mini, with the SDR, multi-band digital implementation of QDX. Simply: QDX + QCX-mini = QMX. 

It has a very clever switching power supply that automatically adjust to prevent spurs and harmonics from the power supply from appearing in the band of interest. 

I was especially interested in his plans to implement an SSB option in future software updates.  Hans will use the same very complicated SSB generation scheme used in the trueSDX rig, but hopes to achieve higher performance and  improved signal quality due to the much more robust hardware of the QMX. 

Here is the interview: 

http://soldersmoke.com/G0UPL23.mp3

Here is the QRP Labs site about the QMX:  http://qrp-labs.com/qmx.html

Here is the QRP Labs web site: http://qrp-labs.com/

And here is a really wonderful and very current article by Hans on the evolution of QRP Labs and its rigs from 2010 right on up through 2023 and the QMX.  It is really interesting: 

http://qrp-labs.com/images/qmx/docs/fdim2023.pdf

Thanks to Bob Crane W8SX, Hans Summers G0UPL, and all of the FDIM organizers. 

Hans G0UPL-- Homebrew Hero

Farhan's sBITX -- Taking Orders! (Video)

It is really looking great.  Congratulations to Farhan for bringing yet another amazing rig to the amateur radio community.   

Order yours here: 

https://www.hfsignals.com/

SDR Direct Sampling: The End of Homebrewing (as we know it)

I sometimes hear hams claim that our efforts to build simple direct conversion receivers are "very relevant" to modern technology and are "directly applicable" to today's communications techniques.  These hams will say that direct conversion receivers are at the heart of modern rigs. 

That's a nice thought, and it might have been true in the past, but I don't think it is true anymore.  

I think the future is what you see written on the black box (!) that encloses the receiver in the above video: "DIRECT SAMPLING RECEIVER."   In the recent past we did have two direct conversion receivers in the front end of SDR receiving systems.  These receivers produced I and Q signals that were fed into the computer (often via the sound card).  That was nice.  

But the writing has been on the wall for a long time.  There is no longer a need for all that direct conversion and I and Q.  Just put a fast Analog-to-Digital converter chip at the front end, convert the entire HF spectrum to a digital stream, and send that stream to your computer.  Or to another part of your "rig."  As in the ubiquitous 7300. 

I don't mean to be a Luddite here.  That big waterfall is very nice.  The receiver sounds great.  But I am a homebrewer and I prefer to build my own gear.  Ordering this black box on my phone,  having it delivered by Bezos to my front step, and then updating the driver, is not what I consider homebrew radio.  

A couple of things I spotted:  The Si5351 chip in the box -- at least one part was recognizable.  And the completely vertical skirts on all the SSB signals -- lots of 7300s out there.  

Hey, to each his own, YMMV, whatever floats your boat.  Just don't kid yourself into thinking that our beloved DC receivers are still somehow being used in these modern black boxes. 

SolderSmoke Podcast #241 Mars, Direct Conversion, PTOs and Glue Sticks, Anniversary of the BITX20, Multus Proficio SDR, Boatanchor Station, MAILBAG

The board I use to test DC RX circuits 

SolderSmoke Podcast #241 is available

Audio (podcast):  http://soldersmoke.com/soldersmoke241.mp3

Video (YouTube): (215) SolderSmoke Podcast #241 October 28, 2022 - YouTube

Introduction:

Back on Mars.  Opposition approaching.  I have a Mars filter.  And (like T.O.M.) a Mars globe. 

N2CQR DXCC done

SolderSmoke in the WayBack Machine

Sticker news

PARTS CANDY -- Don't Scrimp with a Crimp! 

Bill's Bench

School DC RX projects -- in Hyderabad and Northern Virginia. 

Direct Conversion Receivers -- Keeping it Simple, Learning a Lot.  A step beyond the Michigan Mighty Mite. Do we really need 100db?  Do we really need to shield VFOs?  Farhan's super-simple and stable Colpitts PTO.  Audio amps, 1000-8 transformers and rolling your own LM386

PTOs and Glue Stick PTOs.  Paul Clark WA1MAC. Brass vs. Steel bolts.  #20 thread vs. #28 thread.  Backlash Blues. The best Glue Sticks. 

2 meters and the VWS.  Bill has a Baofeng. 

SHAMELESS COMMERCE:  MOSTLY DIY RF

Pete's Bench

20th Anniversary of the BITX20   Pete's early BITX rigs. 

Computer Woes

The Multus Proficio SDR rig

Simple SSB in China  BA7LNN

Things of beauty: Tempo One, NCX-3 and a SBE-33

MAILBAG

-- NS7V is listening.

-- Graham G3MFJ sent SPRAT on a stick.

-- Nick M0NTV  FB Glue Stick and 17 Shelf videos.

-- Dino KL0S HP8640 Junior

-- Mark AA7TA   Read the SolderSmoke Book

-- Steve EI5DD Connaught (Ireland) Regional News

-- Dave K8WPE  Planting the seeds of ham radio interest

-- Peter VK3YE Ruler idea on PTO frequency readout

-- Michael AG5VG Glue Stick PTO

-- Tobias  A polymath with UK and Italy connections.  And cool tattoos.

-- Alain F4EIT   French DC receiver

-- Michael S.  was in USMC, working on PCM/TDM gear

-- Alan Yates writes up Amazon transformer problem

-- Todd VE7BPO,  Dale W4OP, Wes W7ZOI

-- Farhan VU2ESE sent me an sBITX

-- Todd K7TFC   The Revenge of Analog

-- Jim Olds    Building QRP HB gear  

The Multus SDR rig Pete discussed

The older rigs Pete mentioned

My version of DC RX that Farhan is working on

My PTO with VK3YE's ruler frequency readout

SDR on a Breadboard -- But Isn't This an Old-Fashioned Fantasy?

Nice video, but I'm afraid it is a bit of an old-fashioned fantasy.  It would be nice to think that our beloved analog mixers and direct conversion receivers still have a place in the SDR world.   That may have been true a few years ago when we were using soundcard-based SDRs.  But today we just put an Analog to Digital Converter at the antenna, do "Direct Sampling," create a digital stream, and sent it to the CPU for processing, right?   

Sometimes we think that we can show younger people how our older tech (Direct Conversion receivers) is STILL relevant in the age of SDR radio.  But I can just hear them scoffing at this notion, pointing out that I,Q-to-soundcard front ends have gone the way of the dinosaurs, and all we need now is an ADC and a CPU.  

But hey, I am an HDR guy.  Am I missing something here?  

Would this Really Be Homebrew?

 

Hack-A-Day has an interesting post about an FM Broadcast radio project.  I took a look.  The Github page has the schematics for the hardware.  For me, the thing is, there is just not a lot there.  It is a bunch of chips.  The FM Tuner IC is the heart of the project.  With that one you have to dig down to see that it is a digital processing chip:

https://www.lcsc.com/product-detail/RF-Transceiver-ICs_RDA-Microelectronics-RDA5807MP_C167245.html

All of the action -- all of the magic of radio -- is locked inside those little SMD chips.  I suppose if you were skilled enough to write the software or to significantly modify it,  you'd get closer to the experience of homebrew radio,  but very few of us have those kinds of skills -- we just download the software, then struggle to get it into the chips. 

And sure, you could struggle to solder those chips to a PC board, but really, why bother when 99% of the components are already inside the chips?  You should just buy a board with the chips on them and with the software already loaded.  There you have it:  the store-bought appliance is really, really close to the supposedly homebrew receiver. 

But hey, to each his own.  This is a hobby and it is all for fun.  I just think I have more fun with old-style, analog, discrete component HDRs.  YMMV.     

SolderSmoke Podcast #238 -- SolderSmoke Shack South, Cycle 25, Chiquita Banana Radio, RCA, HQ-100, Mate Mighty Midget, Sony SWL RX , Mailbag

SolderSmoke Podcast #238 is available:  http://soldersmoke.com/soldersmoke238.mp3

TRAVELOGUE:  

Cathartic decluttering:  Bill preparing for future winter travel to Dominican Republic.  Will build SolderSmoke Shack South.  Dividing everything up:  Rigs, parts, tools, supplies, antennas, test gear.  Everything.  

OUR SPONSOR:  Parts Candy.  

https://www.ebay.com/usr/partscandy  Premium quality test leads! Hand cut, hand crimped, hand soldered, these will become your new favorite test leads GUARANTEED!

PETE'S BENCH:

-- Cycle 25 better? – Out here on the left coast – it is not evident

-- Chiquita Banana and the US Navy in early ‘wireless” operations.  Why RCA was created by the US Navy in 1919.

-- Update on the MAX2870 –someone has written the code to make it work with the Raspberry Pi and the QUISK SDR software

-- Field Day prep

SHAMELESS COMMERCE DIVISION:

 

Bill needs your help:  

-- Please watch his YouTube videos.  The longer the better!  Success based on hours watched. Great to have on while you are working in the shack. Just go to YouTube and search for the SolderSmoke channel. Or:  SolderSmoke - YouTube

-- Please put links to the SolderSmoke blog on your websites and blogs. 

-- How to USE the SolderSmoke Blog: Propagation, shopping, other sites... 

-- Please put comments under the articles on the SolderSmoke blog.  We like comments and dialogue. 

BILL'S BENCH:

-- Repair of the Sony ICF SW1 shortwave receiver.  Bad electrolytics.  Number Station receiving device? 

-- HQ-100   Q-Multiplier. BFO Switch. AVC.  Noise Limiter limitations.  Dave K8WPE: Old Radio Lessons.

-- MMMRX: Detector circuit. Alignment. Muting. On the air (40 AM with DX-100) 

MAILBAG: 

-- Bob Crane W8SX -- Great interviews at FDIM. On the SolderSmoke Blog. Thanks Bob! 

-- Dave Bamford W2DAB -- Stickers on the Upper East Side of Manhattan.  FB Dave! 

-- Farhan VU2ESE:  LADPAC software now available through W7ZOI' site.  

-- Lex PH2LB: Stickers in a Netherlands pub.  

-- Dave K8WPE Michigan Mighty Mite links.  Old Smoke idea. On the SolderSmoke blog. 

-- Rich WB4TLM was in the electronics class of CF Rockey W9SCH. FB. 

-- Dean KK4DAS Working on  his dad's HQ-170A. VWS maker group on mixers. 

-- Grayson KJ7UM -- Mixology article in ER. 

-- Pete Eaton -- Farhan's new analog rig: Daylight again!  Standby for more info from Farhan. 

-- Will KI4POV New HB Al Fresco single conversion superhet.  FB. 

-- Alvin N5VZH. Shep's "I Libertine."  Yes.  I laughed, I cried,  It changed me. 

-- Chuck KF8TI.  Mr. Wizard!  

-- Steve N8NM on the mend after some routine maintenance. 

-- Ben AB4EN is listening and likes the podcast -- Thanks Ben. 

May 1939 QST

SolderSmoke FDIM Interview: Jack Purdum W8TEE on the Challenges of Decoding CW by Software

 

In his interview with SolderSmoke correspondent Bob Crane, Jack Purdum made some very interesting comments about the challenges of decoding CW with software. He notes that W1AW's code practice CW is perfect, but that below 18 wpm, they deliberately insert a "Farnsworth Delay" that increases the spacing between words -- this complicates automatic CW decoding.  

Jack also talked about the distinctiveness of different CW operators.  Jack  noted that W1AW has no real "fist" in this sense:  "It has the personality of a stick!" 

Jack mentioned that Pete Juliano had been reading book on SDR radios that Jack and Al Peter recently published:  https://www.amazon.com/Software-Defined-Radio-Transceiver-Construction/dp/B09WYP1ST8/ref=sr_1_1?crid=2KPYAMPOW5P6J&keywords=DR.+Jack+Purdum&qid=1654598559&sprefix=dr.+jack+purdum%2Caps%2C40&sr=8-1  

Here is our correspondent Bob Crane's interview at FDIM 2022 with Jack Purdum: http://soldersmoke.com/2022 W8TEE.mp3

Thanks Bob.  Thanks Jack.

SolderSmoke FDIM Interviews: Hans Summers G0UPL Talks about the QDX and His New Balloon Tracker

 

Thanks to Bob Crane W8SX for getting us this wonderful interview with Hans G0UPL.  Its really amazing to hear Hans talk about how many QDX rigs and Baloon Trackers have been sold by QRP Labs, and how quickly they sell.  Really great.  Hans's comments on the realities of the parts shortage was also very interesting. 

Listen here (about 7 minutes):  http://soldersmoke.com/2022 G0UPL.mp3

U4B Balloon Tracker 

SolderSmoke FDIM Interview with Farhan VU2ESE -- The sBITX is Coming!

Bob Crane W8SX --  our correspondent in Dayton/Xenia --  once again collected interview with FDIM presenters. Thanks Bob!  Here is his talk with our friend Farhan:  

http://soldersmoke.com/2022 VU2ESE.mp3

Here is a great post on the sBITX (May 30, 2022) from Farhan's web site: 

https://www.vu2ese.com/index.php/category/uncategorized/

Here is Farhan's amazing presentation on the sBITX at the 2021 FDIM: 

https://soldersmoke.blogspot.com/2021/11/farhans-amazing-knack-story-from.html

SolderSmoke Podcast #237 is available: TV Show! No! W9YEI's 1939 TV. 1712 Rig. HQ-100. New SDR Rig and Book. JF3HZB's VFO Digital Dial. FIELD DAY! PSSST. MAILBAG

SolderSmoke podcast #237 is available:  http://soldersmoke.com/soldersmoke237.mp3

Travelogue -- New York City!  Stickers!
And about that trip to Los Angeles for the SolderSmoke Cable TV show... 

Well, it fit in well with SolderSmoke's UNFORGETTABLE appearance on the Oprah book club.
And TechieTatts? Daughter worried about listeners rushing to get tattoos -- A risk we were willing to take.

https://in.pinterest.com/padmakumar10/techie-tatts/

This episode is sponsored by PartsCandy.  GREAT test leads: https://www.ebay.com/usr/partscandy

Bill's Bench

Tracking down Johnny Anderson's 1939 or 1940 homebrew TV receiver.

https://soldersmoke.blogspot.com/search?q=Anderson
Working with Joh DL6ID.
Jean Shepherd's January 1973 description.
FlickLives web site and Steve Glazer W2SG have lots of info on Shep and his friends.
Internet allows us to look at TV articles that were being published.
We've concluded: Probably 1939 or 1940, using an RCA 913 1 inch CRT tube. 

Lots of ideas from IRE Journal, QST, and Gernsback magazines.
Quite an achievement! Amazing how much pre-war TV progress there was.  

17-12 rig
All boxed up and working DX!
Figured out how to display both 17 and 12 on the same LED. https://www.youtube.com/watch?v=kAmmFZyFu8w
Drain protector for speaker cover. Copper tape to cover horrible cabinet making.
I think I need a Hex Beam.

Hammarlund HQ-100
Needed some maintenance.
I started to look more closely at it.
Got the Q-Multiplier to work -- it really adds a lot on CW.
Makes me feel guilty about all the QF-1s...
Using the 100kc calibrator with a 455 kc crystal as a BFO,
keeping Q multiplier below oscillation point.
Moved the BFO switch to the front panel. Helps a lot.
Need to fix the S-meter AVC circuitry.
Much more sturdy than the S-38E.
S-38E 1957-61 $54.95 5 tubes.  AC/DC.
HQ-100 1956-60 $169  10 or 11 tubes.  Power supply,  regulator.
You get what you pay for.  

Pete's Bench

Jack Purdum and Al Peter's new SDR rig and book (featured on the SS blog Amazon ad).
JF3HZB's beautiful digi VFO.
Backpack antenna for Field Day?  
Pipsqueak Disaster -- Too simple?
Peashooter Eye Candy.
Build Something Different.

MAILBAG

James W0JKG CBLA -- Others are building MMM too!
SM4WWG // Jörgen  Wonderful message.  Joined GQRP.  No longer "wrong."
Dennis WC8C Libraries for Max2870 board.
Jack NG2E  Progress on the Right to Repair movement. 
Jim K9JM  Someone cutting into our business with Solder candles!  
Chuck  WB9KZY Correctly identified the location of the IBEW sticker.  As did Dan Random.
Dave Bamford (who lives nearby) suitably impressed. 
Farhan wrote to us about a video on Don Lancaster.  Homebrew keyboards!  Yea!
Dean KK4DAS  QRP to the Field.  HB2HB 40 SSB   QRP  I feel virtuous.  
Todd K7TFC likes my ingenious use of the drain screen as the speaker protector on the 17-12 rig. 
Todd  had good thoughts on granular approach to homebrewing as seen in the Don Lancaster video.
Lex PH2LB HORRIFIED by my reverse polarity protection circuit.  This is a touchy subject! (as is WD-40!)
Rogier PA1ZZ sending great info on SWL and numbers stations.
Jesse N5JHH -- The guy who made the IBEW stickers -- Liked the NYC stickers. 
Steve N8NM has a new antenna article on his blog: https://n8nmsteve.blogspot.com/
Randy AB9GO Agrees -- Can't GIVE old 'scopes away. 
Dino SV1IRG Liked the 17-12 rig videos. 
Steve Hartley G0FUW Murphy's Law of Enclosures. 
Ralph AB1OP FB on the 17-12 Rig. 
Roberto XE1GXG --Our correspondent in Guadalajara. Petulant, irritable people on the computer scene.

Have some gear looking for a good home:   Tek 465 'scope from Jim AL7R W8NSA.   SBE Transceivers.  Windsor Signal Generator.  Let me know if you are interested and can either pick up or arrange shipping.  

John Anderson W9YEI Homebrew Hero